Matt Stringer holding a large white model airplane outdoors with a cloudy sky and landscape in the background.

RCTV - Sukhoi 26MX 34" 6mm Depron Kit

White
$95.00 USD
Skip to product information
Matt Stringer holding a large white model airplane outdoors with a cloudy sky and landscape in the background.
  • Matt Stringer holding a large white model airplane outdoors with a cloudy sky and landscape in the background.
  • White foam model airplane on grass with a wooden fence in the background
  • Control linkage close up picture
  • White foam model airplane on grass with a wooden fence in the background
  • Model airplane on grass with a person's hand touching it
  • Close-up of a white and black airplane model with 'Flight Pilot' branding inside a building.
  • Black mechanical parts and a roll of tape on a white background
RCTV - Sukhoi 26MX 34" 6mm Depron Kit

RCTV - Sukhoi 26MX 34" 6mm Depron Kit

$95.00 USD
ColorWhite

Depron foamies are back!  Nothing quite beats the crisp flying characteristics of genuine Depron foamie, and the Sukhoi 26MX is ready to send.  

RCTV's 6mm Depron series is designed for the front yard, the park, the flying field, even indoors these will tear up the skies wherever you want to fly.  Striking a balance of stiffness, lightweight but not too feathery was key to have the ultimate all-rounder 3D / XA modern day foamie. 

Our kits are precision laser cut and include a tailored hardware kit that makes assembly a breeze.  Guessing on where the carbon reinforcements go are things of the past thanks to the pre-determined trussing locations and pre-cut carbon extrusions.

All 6mm kits also come with their hinges pre-beveled and taped with 3M's 1" wide Blenderm, so no more hassle when it comes to cutting hinge-lines. Making your time to gluing and rigging up the airframe that much quicker.

______________________________________________

Specs 

Wingspan : 34 inches 

AUW : 6.0 - 7.0 oz 

Servos : Sub Micro 6- 10 gram servos QTY 3 

Motor : Recommended T-Motor AM40 V2 F3P 3D/4D ( 1550kv for 3s / 1880kv for 2s )

ESC : Recommended T-Motor AM16A F3P 3D/4D

Battery : Recommended ThunderPower  2s 500 mAh  Lipo / 3s 500 mAh (25C)

____________________________________________

When it comes to designing foamies we want to bring aesthetically pleasing, accurate looking profiles to the table without compromising on flight characteristics and performance.  Back in the early to late 2000's the Sukhoi 26 was a staple airframe design in the Aeromusical F3P scene.  Since then the airframe fell out of style, but we felt like 2026 was the perfect time to breathe some life into it again.  Carefully styled to maintain the unique features of this classic round cowl beast, our 34" Sukhoi 26MX is a rifle roll monster and shows off our affinity with one of the most iconic round cowl aerobats!

____________________________________________

Servos

For servos we recommend the following 

JR PROPO -  DS118 ( Aileron )  S319 ( Elevator and Rudder )

KST -   KST08 ( Aileron ) KST06 ( Elevator and Rudder )

Hitec RCD - HS5065MG ( Aileron )  HS45HB ( Elevator and Rudder )  

Styled With
Text indicating 'Proudly Designed & Made in Ventura, CA USA' with a website URL.
White foam board cut into various shapes on a wooden surface
THE FOAM

That's right! Our kits are made from genuine Depron Foam. Thanks to RCDepron.com for becoming the USA importer of this amazing material!
HARDWARE

Our hardware kits are 3D Printed with CF infused filament to provide dimensionally accurate and strong parts that can stand up to the elements.

All Carbon Rods and Spars are pre-cut to their respective lengths.
DESIGN

Scratchbuilt foam planes is how I personally started out in this hobby. RCTV designs bring 20+ yrs of my experience to your build bench.
Control linkage close up picture
BALL LINKS

Micro ball links for foamies are paramount when it comes precision and control.
DESIGN

After a few months of prototyping, RCTV's innovative, lightweight and durable 3D Printed ball links are ready for the skies.

Keeping up with the high demands of 3D / XA flying.

DURABILITY

Despite being 3D Printed, these ball links are durable and operate smoothly every time. No more need for Z Bends or bolts.

Close-up of white foam with a textured surface
MADE IN THE USA
White polka dot pattern on a white background

All of our kits are proudly made right here in Ventura, CA, USA.

LASER CUT

Cut with precision, all of our kits are laser cut using a C02 Laser.

Giving you a perfect fit every time. Laser Cutting Depron foam also increases rigidity along the edges keeping your plane looking sharp!
PRE-HINGED

All kits come pre-beveled with a router made hinge-line and pre-taped with 1" 3M Blenderm. Allowing you to start building faster.

You may also like